Allied Telesis AT-WL2411 - Manual (Page 63)

AT-WL2411 Installation and User’s Guide
63
1. From the menu, click Ethernet. The Ethernet screen appears, as
shown in Figure 23.
Figure 23 Ethernet
2. Click down arrow on the right side of the Hello Period field and
choose a hello period of 1, 2, or 3 seconds.
3. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.