Allied Telesis AT-WL2411 - Manual (Page 128)

AT-WL2411 Installation and User’s Guide
128
1. From the main menu, click Security and then click Passwords. The
Passwords screen appears, as shown in Figure 57.
Figure 57 Passwords
2. Enable or disable Radius Authorization.
3. Configure the parameters, as described below.
RADIUS Authorization
Determines if you are using a RADIUS security server to
authenticate devices that can communicate with this access
point.
RADIUS Server #1 IP Address
Enter the IP address of the RADIUS server that you want to use to
authenticate user logins.
RADIUS Server #1 Secret Key
Enter the shared secret key for the RADIUS server. You can enter
the key from 1 to 32 characters in ASCII or in hexadecimal. To enter
a hexadecimal key, it must start with 0x. For example, enter the
ASCII key as ABCDE; enter the same hexadecimal key as
0x4142434445.
RADIUS Server #2 IP Address
Enter the IP address of the backup RADIUS server that you want to
use to authenticate user logins if RADIUS server #1 is unavailable.