Allied Telesis AT-WL2411 - Manual (Page 125)

AT-WL2411 Installation and User’s Guide
125
Enabling Access Methods
There are four access methods that you can enable or disable depending
on how you want users to be able to configure or manage the access
points:
❑ a Web browser interface
❑ a Telnet session
❑ an SNMP management station
❑ the MobileLAN access Utility
The default is that all access methods are enabled. You may want to
disable any of these methods to prevent access by an unauthorized
method.
To enable or disable access methods:
1. From the main menu, click Security. The Security screen appears, as
shown in Figure 56.
Figure 56 Security
2. Enable or disable the access methods that users can use to connect to
the access point. The security parameters are explained below.
Telnet Access
Determines if users can use a Telnet session (or a communications
program) to configure or manage this access point.