Allied Telesis AT-WL2411 - Manual (Page 114)

AT-WL2411 Installation and User’s Guide
114
4. From the IEEE 802.11b Radio menu, click Advanced Configuration.
The Advanced Configuration screen appears, as shown in Figure 47.
Figure 47 Advanced Configuration
5. Configure these advanced parameters:
Enable the Data Rate Fallback parameter.
If you are using a 2 Mbps voice 2 telephone, set the Basic Rate to
2 Mbps.
If you are using a 1 Mbps voice 2 telephone, set the Basic Rate to
1 Mbps.
6. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.