Allied Telesis AT-WL2411 - Manual (Page 149)

AT-WL2411 Installation and User’s Guide
149
2. Click a MAC address hyperlink. The access point pings the device and
then the Ping Utility screen appears showing the results.
3. Click Return to connections to return to the AP Connections screen.
ICMP Echo ICMP (Internet Control Message Protocol) echo lets you ping devices
using their IP address. ICMP echo can only be used if the access point has
determined the IP address of the end device or another access point. If
the access point is acting as an ARP server, it will determine the IP
addresses of the end devices that are attached to it and allow you to use
ICMP echo on the wireless network. The access point always knows the
IP address of all access points in the spanning tree.
To use ICMP echo:
1. From the menu, click Maintenance and then click AP Connections.
The AP Connections screen appears.
2. Click an IP address link. The access point pings the device and then
the Ping Utility screen appears showing the results.
3. Click Return to connections to return to the AP Connections screen.