Allied Telesis AT-WL2411 - Manual (Page 164)

AT-WL2411 Wireless Access Point Installation Guide
164
Using Console Command Mode
Another way you can access the access point file system is through
Console Command mode. Use Console Command mode to upgrade
access points using TFTP and Script files.
To enter Console Command mode, do the following:
❑ Choose Command Console from the Maintenance menu.
When you first enter Console Command mode, a list of valid console
commands appears. You can display the console commands any time
you are in Console Command mode.
To display console commands, do the following:
❑ Type F and press Enter. The following screen appears.
To exit Console Command mode, do the following:
❑ Type exit and press Enter.
Several file menu commands require that you enter file names. To
indicate the segment where the file is located, precede the file name
with either a segment number or name followed by a colon. For
example:
1:access point.prg
refers to the file named access point.PRG that is located in segment 1. If
you do not specify a segment name or number, the access point
searches the segments in the following order until it finds a file that
matches the file name:
RAM, 1, 2, 3, 4
Command Description
======= ===========
Fb fb
Fd fd ( | all) - directory list
Fdel fdel - delete file
Fe fe ( | all) - erase
segment(s)
Tftp File transfer
Script Execute script files
SDVars Software Download variables
Exit Return to main menu
? Display this help