Allied Telesis AT-WL2411 - Manual (Page 105)

105
Chapter 6
Configuring the Radio
This chapter explains how to configure the radios so that they work with
your wireless end devices. It also provides some general guidelines to
configuring point-to-point bridges and WAPs.
About the Radios
The AT-WL2411 access point consists of a group of multiport Ethernet
bridges. The 802.11b radio on the access point is:
❑ Wi-Fi Compliant
❑ Wireless Hops
The next sections explain how to configure the radio in your access
point. If the radio is not installed in your access point, then you will not
see it listed in the main menu.