Allied Telesis AT-WL2411 - Manual (Page 41)

AT-WL2411 Installation and User’s Guide
41
5. Type the default user name ATILAN and press Enter and then type the
default password ATILAN and press Enter. The Configuration menu
appears, as shown in Figure 12.
Figure 12 Configuration Menu
6. To assign the access point an IP address so that you can continue
configuration remotely, proceed to the next section Assigning an IP
Address on page 42.
To continue configuration using the serial connection, use the
menu shown in Figure 12.
7. When you have finished your configurations, save you changes by
using the Save Configuration menu option and then reboot the
access point to activate your changes.