Allied Telesis AT-WL2411 - Manual (Page 44)

AT-WL2411 Installation and User’s Guide
44
Using a Web Browser
After you have configured the IP address and other basic network
parameters as described in Assigning an IP Address on page 42, you
can manage your access point using a Web browser.
You must know the IP address of the access point to manage it remotely.
If a DHCP server assigned the IP address, you must determine the IP
address from the DHCP server.
Only one session can be active on the access point at a time. If your
session terminates abruptly or a new signon screen appears, someone
else may be using the access point.
When using the Web to establish remote management of your access
point, keep the following points in mind:
❑ Your session terminates if you do not use it for 15 minutes.
❑ Console Command mode is not available.
To establish a Web browser session with the access point, do the
following:
1. Type the DHCP server-assigned IP address or the IP address you
assigned to the access point in the address field of your Web browser.
Note
If you access the Internet using a proxy server, you must add the IP
address to your exceptions list. The exceptions list contains the
addresses that you do not want to use with a proxy server.