Allied Telesis AT-WL2411 - Manual (Page 129)

AT-WL2411 Installation and User’s Guide
129
RADIUS Server #2 Secret Key
Enter the shared secret key for the backup RADIUS server. You can
enter the key from 1 to 32 characters in ASCII or in hexadecimal.
To enter a hexadecimal key, it must start with 0x. For example,
enter the ASCII key as ABCDE; enter the same hexadecimal key as
0x4142434445.
User Name
If RADIUS authorization is disabled, you can specify the user name
to use to login to the access point. This parameter can be from 0
to 16 characters long.
Password
If RADIUS authorization is disabled, you can specify the password
to use to log into the access point. This password gives the user
read and write access to the access point configuration. This
parameter can be from 0 to 16 characters long.
Read Only Password
If RADIUS authorization is disabled, you can specify the password
to use to log into the access point. This password gives the user
read-only access to the access point. This user is able to view the
configuration and execute diagnostics, but cannot perform any
tasks that affect the operation of the access point, such as
changing configuration options, rebooting, or downloading
software.
To disable this password, delete it.
Service Password
Determines if a user can use the service password to connect to
this access point. Gives read-only access to the access point. It is
recommended that you do not disable the service password.
Enabling this password may help Technical Support help you with
your installation.
4. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.
Once the changes are activated, you must enter these new values
when you use a Web browser to connect to this access point. This
table explains the Password parameters.