Allied Telesis AT-WL2411 - Manual (Page 85)

AT-WL2411 Installation and User’s Guide
85
Configuring
Global RF
Parameters
Use global RF parameters to set various parameters on the access points.
If you are configuring the root access point and you set the Set Globally
parameter to Enabled, the value for that parameter is set globally for all
access points and wireless end devices in the network. If you are
configuring the root access point and you set the Set Globally parameter
to Disabled or if you are not configuring the root access point, each
device uses its local setting.
To configure global RF parameters:
1. From the menu, click Spanning Tree Settings. The Spanning Tree
Settings screen appears, as shown in Figure 34.
Figure 34 Spanning Tree Settings