Allied Telesis AT-WL2411 User Manual
Page 72
AT-WL2411 Installation and User’s Guide
72
4. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.
Setting Filter Expressions.
You can set filter expressions by specifying parameters for packet filters.
You can also create a filter expression, which is executed in ascending
order based on the ExprSeq values until the access point determines
whether to pass or drop the frame.
To set filter expressions:
1. From the main menu, click Ethernet and then click Advanced Filters.
2. Click Filter Expressions. The Filter Expressions screen appears, as
shown in Figure 29.
Figure 29 Filter Expressions
3. Configure the filter expressions parameters. The filter expressions
parameters are defined below.
ExprSeq (Expression Sequence)
Chains expressions together for filtering. After you change the
parameter, the statements are reordered and renumbered so the
Expression Sequence order is maintained. The range is from 0 to
255.