Allied Telesis AT-WL2411 - Manual (Page 83)

AT-WL2411 Installation and User’s Guide
83
2. Click Global Flooding. The Global Flooding screen appears, as shown
in Figure 33.
Figure 33 Global Flooding
3. Configure the Global Flooding parameters. The Global Flooding
Parameters are explained below.
Multicast Flood Mode
Determines the flooding structure for inbound multicast frames
with unknown destination addresses.
Universal
Allows any wireless end device to communicate with any
other wireless end device.
Hierarchical
Allows wireless end devices to communicate with nodes
on the primary LAN but not with other wireless end
devices.
Disabled
Prevents flooding.
Multicast Outbound to Terminals
This parameter only applies to 802.11b radios. If multicast flood
mode is not disabled, this parameter specifies if outbound
multicast frames with unknown destination addresses are
flooded toward wireless end devices