HP XP Racks - Manual (Page 81)

Table 19 Copy pair statuses of volumes obtained by the YKQRYDEV command (Cnt Ac-S Z or TCA)
(continued)
Description Status of the copy pair in
the storage system
Copy pair status acquired
by YKQRYDEV
The user has suspended the S-VOL. (The P-VOL has been
updated and the differential data between the P-VOL and
S-VOL is being recorded.) Suspended SUSPOP (04)
The user has suspended a copy pair in which REVERSE is
specified. Suspended SWAPPING (04)
The copy pair has been suspended because the secondary
storage system has received a suspend request from the
primary storage system. Suspended SUSPOP (05)
The copy pair has been suspended because the PPRC FREEZE
command is issued to the primary storage system. Suspended SUSPOP (0A)
The copy pair has been suspended because the primary
storage system has detected an error status on the secondary
storage system. Suspended SUSPCU (06)
The P-VOL has been suspended because the user dissolved
the copy pair from the S-VOL (changed to the SIMPLEX status). Suspended SUSPER (07)
The copy pair has been suspended because the primary
storage system detected either an error during migration with Suspended SUSPCU (08)
the secondary storage system or an I/O error during update
copying.
The copy pair has been suspended because, when the power
was turned on (IMPL), the primary storage system detected that Suspended SUSPER (09)
the pair control information that had been in memory was no
longer available (that is, the information had been lost). This
error occurs when the primary storage system was turned off
for a period that exceeded the backup period for non-volatile
memory.
The copy pair has been suspended because the data between
the P-VOL data and the S-VOL data did not match during the
initial copying phase. Invalid track formatting causes this error. Suspended SUSPER (50)
The copy pair is changing to the suspend status. Suspending TRANS (60)
The copy pair is changing to the SIMPLEX status. Deleting TRANS (61)
The primary storage system has suspended all the copy pairs
due to a planned outage (turned off). Suspended SUSPER (62)
An update I/O without a timestamp was detected on a pair
in a consistency group for which SYSTEM is set as the timer
type. SEQCHK SUSPER (A0)
Table 20 Copy pair statuses of volumes obtained by the YKQRYDEV command (Cnt Ac-J Z)
Description Status of the copy pair in
the storage system
Copy pair status acquired
by YKQRYDEV
SIMPLEX status. Simplex SIMPLEX
The copy pair is changing to the DUPLEX status (during an
initial copy or resynchronization). Duplex Pending PENDING (01)
DUPLEX status. Duplex DUPLEX (02)
The user has suspended the copy pair from the P-VOL. Suspended SUSPOP (03)
Understanding copy group operations 81