HP XP Racks - Manual (Page 180)

Table 52 How to Prepare the Configuration Files at Each Site (3DC Multi-Target (Cnt Ac-S Z x Cnt
Ac-J Z) configuration) (continued)
How to Prepare Contents File Type
At the Secondary Site At the Local Site At the Primary Site
Not required Not required Define a path set Path set
definition file •
An inter-control unit logical
path from the primary site
to the local site
•
An inter-disk controller
logical path from the
primary site to the remote
site
Not required Define a path set Not required An inter-control unit logical
path from the local site to the
primary site
Define a path set Not required Not required An inter-disk controller logical
path from the remote site to the
primary site
Not required Not required Define a route list Route list
definition •
A route/command device
from the primary site to the
local site
file/Command
device
definition file
•
A route/command device
from the primary site to the
remote site
Not required Define a route list Not required A route/command device of
Local
→ Primary → Remote
Define a route list Not required Not required A route/command device of
Remote
→ Local → Primary
Transfer from the
primary site Transfer from the
primary site Define a copy group A Cnt Ac-S Z copy group Copy group
definition file
Define a copy group A Cnt Ac-j Z copy group
NOTE: If you define the route list, the route list definition file and the command device definition
file will be created at the same time.
Definition Procedure (3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) Configuration)
First, set the items that need to be set by using Remote Web Console from among the items listed
in
Table 49 (page 177) .
This section explains the definition of a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration
as shown in the ISPF panel.
The following explains the legend for the figures used for the operation procedures described in
this section:
Performing a Scan (3DC Multi-Target Configuration)
Perform a scan that includes the volumes to be defined in the copy group and the command device.
180 Configuration definitions