HP XP Racks - Manual (Page 285)

Figure 106 Example of a Configuration for Using the Cnt Ac-J Z ATTIME Suspend Function
Preparing the hardware (Cnt Ac-J Z ATTIME Suspend)
Table 88 (page 285) lists the prerequisite hardware and Table 89 (page 286) lists the hardware
settings for using Business Continuity Manager in the Cnt Ac-J Z ATTIME suspend function.
Table 88 Prerequisite Hardware (Cnt Ac-J Z ATTIME Suspend)
Remarks Description Item
– Install a host machine at the primary site. If copy
group operations need to be performed from the Host
secondary site, also install a host machine at that
site.
The maximum number of storage systems for each site
depends on the storage systems. Configuration Primary site: one or more XP12000/XP10000,
XP24000/XP20000, XP P9500 disk arrays, or
XP7 storage. Storage system
limitations may exist. Consult your HP Representative
Secondary site: one or more XP12000/XP10000,
XP24000/XP20000, XP P9500 disk arrays, or
XP7 storage.
for detailed information about the availability of specific
features for the array models being used.
– Establish a bidirectional physical path using
appropriately configured fiber channel ports
between the primary site and the secondary site. Link between storage
systems (physical path)
Defining a configuration so that the Cnt Ac-J Z ATTIME Suspend function can be used 285