HP XP Racks - Manual (Page 683)

Use the following options to specify the information to be displayed.
•
SUMMARY
Number of copy pairs by copy pair status
•
DETAIL
Details by copy pair
•
STATS
Operational information for copy groups. This information can be displayed
only when the copy type is TrueCopy Asynchronous for Mainframe or
Continuous Access Journal Z.
•
RPO
Consistency information on copy groups. This information can be displayed
only when the copy type is TrueCopy Asynchronous for Mainframe or
Continuous Access Journal.
message-level ~ <>
Specify the level of the message to be output. Specifiable values are CONS, ERROR,
STATUS
, and INFO.
For details on message levels, see the HP XP7 for Business Continuity Manager Reference Guide
for the description on parameters in the YKMONOPT file.
If you only want to specify the message level and omit the output type, type ,, (two commas) as
shown in the following example:
MODIFY YK,REPORT CGID=BCMCG,,CONS
Example
To display the operational information for the copy group (copy group ID: BCMTC) in the BCM
Monitor instance whose ID is YK, enter the following command:
MODIFY YK,REPORT CGID=BCMTC,STATS
SET command
To change the values specified in BCM Monitor parameter files after BCM Monitor has started,
use the MODIFY SET command. The following values can be modified:
•
CYCLETIME
•
WAITTIMEOUT
•
The monitoring status of a copy group
•
MSGLEVEL
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
Δ
1
[cataloged-procedure-for-startup-name.]identification-name
,SET
Δ
1
{CYLCETIME=cycle-time|
WAITTIMEOUT=timeout-value|
MONITOR=[START|STOP],CGID=copy-group-id|
MSGLEVEL=SYSTSPRT-message-level,console-message-level}
Operator commands available in BCM Monitor 683