HP XP Racks User Manual
Page 245
Setting up the Storage System
Set up the following items by using Remote Web Console.
1.
Configure an arbitration command device on the subordinate disk controller.
2.
Set up an arbitration path from the supervisor disk controller to the subordinate disk controller.
3.
Map the arbitration command device on the subordinate disk controller to the supervisor disk
controller (setup of the remote command device).
4.
Register the journal group (timer type: SYSTEM) in each of the intermediate site and remote
site storage systems.
Setting up a Business Continuity Manager Environment
•
Creating a disk configuration definition file
Perform a scan that includes the volumes to be defined in the copy group and the command device.
1.
From the primary host, perform a Local Scan on the primary site storage system.
2.
From the intermediate host, perform a Local Scan on the intermediate site storage system.
3.
From the remote host, perform a Local Scan on the remote site storage system.
Defining a 4x4x4 Cascade Configuration 245