HP XP Racks - Manual (Page 133)

Figure 71 Example of defining a route list
To define the route list for the configuration in the figure above:
1.
Define the route list ID (UR2DC).
2. Define the first storage system on the route.
Specify the storage system on the primary site (device address domain ID: SF, serial number:
35114
).
3. Define the next storage system.
Specify the storage system on the secondary site (device address domain ID: LA, serial number:
35115
).
4. Define the command device line.
After specifying the APID (0001) and then definining command devices for the storage system
defined in the route, define the command device line for CD1
→CD2.
For details about the ISPF panel operations, see “Defining a route list” (page 606) .
Images for route list definitions
The following figure shows an image of defining the route list in the configuration shown in
Figure 71 (page 133) .
Setting up the Remote DKC Control Function environment 133