HP XP Racks - Manual (Page 594)

Type . . . . . . . . DKC (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
S Primary __
Secondary __
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
The serial numbers of the scanned storage systems display in the Select Storage System panel.
6. Specify s in the AC column of the storage system serial number (14002).
Select Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:04:17
Supported action: s(Select)
AC S/N Device Address Domain ID ---
S 14002 SF
14001 LA
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
7. Press the Enter key.
You are returned to the Edit Logical Path Definition panel. The values are displayed in the
S/N, Model, IFType, and PathID columns of this panel.
If the storage system is an XP7 storage or XP P9500 storage system, to change a value in the
PathID column to a value other than 00, specify the value.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Attributes
Type . . . . . . . . DKC (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
Primary 14002 USP __ 1515 00
Secondary __
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
If the storage system in the primary site is directly connected to the host, you can enter the CU
and CCA to specify a device to which I/Os are issued during operation on a path.
If the device is not specified, I/Os are issued for any device. When entering the CU and CCA,
you must enter both as they are defined in the disk configuration definition file for the selected
storage system.
594 Using the ISPF panels