HP Insight Control User Manual

Page 33

Review the system and storage configuration information to ensure the setup is correct. The system
information section includes the following information:

•

RAM

•

Boot controller

•

Boot controller disk size

•

PCI device information (collapsed by default)–only applicable for X2P migrations

If the boot controller disk size is zero or the controller is not supported, an error message appears under
PCI device information.

If a bootable drive is not configured on this system, see the

Post-migration

section in this guide.

If the primary controller configured in your system is not supported by this version of the Insight Control
application, see the

Insight Control Support Matrix at

www.hp.com/go/insightcontrol/docs

for a

complete list of supported controllers for the destination server (only applicable for X2P migrations).

Configure the storage on this server to accommodate the data to be migrated from the source server.

Booting the destination server for P2P, V2P, and X2V migrations