HP Insight Control - Manual (Page 99)

•
If the destination server is selected to reboot upon completion, additional configuration options
are available. If PSP executables are available on the application station and selected, the network
settings on the destination can be configured. For information on how to upload PSP executables,
see the Upload Drivers section.
•
Select a PSP to install on the destination server and configure a static IP for each destination NIC
as needed.
•
If you are performing a migration from the Insight Control CMS, select Rediscover in SIM if the
destination server must be discovered in Systems Insight Manager after the migration.
You can only choose this option if at least one of the destination server NICs is assigned a network
IP in step 6 of the Migration Wizard.
12. Click Next.
13. Review and confirm the migration details, and then click Begin Migration.
Virtual-to-ProLiant (V2P) migrations for Windows 99