HP Insight Control - Manual (Page 68)

The Computed Destination Server Disk Requirement section lists the disks required on the destination
server to support migrated volumes. Insight Control server migration updates the Size, Minimum
Destination Size
, and Maximum Destination Size values in the lower table dynamically as volumes
in the upper table are selected or cleared for migration. A message appears under the table, indicating
the number of logical units that you must create on the destination server. The entry in the Minimum
Destination Size
column is estimated, based on reducing eligible volumes to their minimum size during
migration. Additional space might be required to accommodate disk geometry differences. Verify the
destination server disks are prepared to support the selected partitions.
5. Select the appropriate destination virtualization layer in the Select Virtualization Layer box.
•
If the destination virtual machine was manually created and booted with the Insight Control server
migration Virtual Machine Boot CD, select Manual Boot - Manually create VM through VM
Host's Infrastructure Client
. Enter the four-part IP address of the destination virtual machine,
and then click Next.
68 Using Insight Control server migration to migrate servers