HP XP RAID Manager Software - Manual (Page 97)

Corresponding command Description Operation type
-device_grp_name
[]}[-user_threshold
[] ]
raidcom add snap_pool {{-pool_id ID#> [-pool_name ] | Extend the capacity of a pool for Snapshot.
-pool_name [-pool_id ID#>]} | -pool_id -pool_name
}}{-ldev_id
…[-cnt] | -grp_opt
-device_grp_name
[]}[-user_threshold <%> ]
raidcom monitor pool -pool { |
} -operation Start or stop the performance monitor for Smart
Tiers
raidcom reallocate pool -pool {
| } -operation Start or stop the tier reallocation of a pool for
Smart Tiers.
raidcom add lun -port [name>] {-ldev_id [-lun_id] | Set LU path. LU path
(See the manual: HP P9000
Provisioning for Open Systems
User Guide)
-grp_opt -device_grp_name
[]}
raidcom delete lun -port [name>] {-lun_id | -ldev_id Delete LU path.
| -grp_opt
-device_grp_name
[]}
raidcom get lun -port [name>] Display LU path information.
raidcom discover external_storage -port
Search external storage. External volume
(External Storage)
raidcom discover lun -port
-external_wwn Search external volume. (See the manual: HP P9000
Provisioning for Open Systems
User Guide)
raidcom add external_grp -path_grp group#> -external_grp_id -port Map external volume.
-external_wwn -lun_id
[-emulation ]
raidcom disconnect external_grp
{-external_grp_id | -ldev_id
} Disconnect the connection for external volume.
raidcom check_ext_storage external_grp
{-external_grp_id | -ldev_id
} Check the connection for external volume and
restore it.
raidcom delete external_grp -external_grp_id
Unmap external volume.
raidcom get external_grp [-external_grp_id
] Display mapped external volume information.
raidcom add ldev - external_grp_id
-ldev_id -capacity Create LDEV in external volume.
[-emulation type>][-location ][-mp_blade_id
]
raidcom get ldev {-ldev_id … [-cnt
] | -grp_opt Display LDEV information created in external
volume.
-device_grp_name
[]} [-key ]
Available provisioning operations 97