HP XP RAID Manager Software - Manual (Page 24)

# at the head of each line is used to insert a comment in the configuration file.
Example 2 Configuration file example — UNIX-based servers
HORCM_MON
#ip_addressservicepoll(10ms)timeout(10ms)
HST1horcm10003000
HORCM_CMD
#unitID 0... (seq#30014)
#dev_name dev_name dev_name
dev/rdsk/c0t0d0
#unitID 1... (seq#30015)
#dev_name dev_name dev_name
/dev/rdsk/c1t0d0
HORCM_DEV
#dev_groupdev_nameport#TargetIDLU#MU#
oradboradb1CL1-A3 10
oradboradb2CL1-A3 11
oralogoralog1CL1-A5 0
oralogoralog2CL1-A15 0
oralogoralog3CL1-A15 1
oralogoralog4CL1-A15 1 h1
HORCM_INST
#dev_groupip_addressservice
oradbHST2horcm
oradbHST3horcm
oralogHST3horcm
Figure 13 Configuration file example — Windows servers
The following table lists the parameters defined in the configuration file and specifies the default
value, type, and limit for each parameter.
Table 4 Configuration (HORCM_CONF) parameters
Limit Type Default Parameter
64 characters Character string None ip_address
15 characters Character string or numeric value None Service
None Numeric value* 1000 poll (10 ms)
24 RAID Manager software environment