HP XP RAID Manager Software - Manual (Page 121)

Executed command Description Operation overview Step
raidcom modify external_grp
-external_grp_id {-cache_mode Modify external volume option (cache
mode, inflow mode, and MP blade setting). Modifying external
volume option 5
< y|n > | -cache_inflow < y|n > |
-mp_blade_id }
raidcom get external_grp [-external_grp_id
] Display external volume information and
confirm result of executing command. Checking external
volume information 6
raidcom add path -path_grp group#> -port -external_wwn strings> Set external path. Execute the required
number of commands. Setting external path 7
raidcom get path [-path_grp group#>] Display external path information for and
confirm the result of executing the
command. Displaying external
path information 8
raidcom modify port -port
-security_switch y Make enabled the LUN security of port.
Modify setting such as port topology and
data transfer speed as needed. Setting port of
external storage
system 9
raidcom add host_grp -port
-host_grp_name Specify port, map LDEV to LUN and create
an LU path. Creating host group 10
raidcom modify host_grp -port
[] -host_mode < host Specify port and set host mode for host
group. Setting host mode 11
mode> [-host_mode_opt option> … ]
raidcom get host_grp -port [group name>] Display host group information and confirm
result of executing command. Displaying host
group information 12
raidcom add hba_wwn -port [group name>] -hba_wwn Register host to host group of the port. Adding host to host
group 13
raidcom get hba_wwn -port [group name>] Display WWN of connection host
registered to the host group and confirm
the result of executing the command. Displaying WWN
information 14
raidcom add ldev - external_grp_id
-ldev_id {-capacity Specify external volume group and create
LDEV. Creating LDEV 15
| -offset_capacity | -cylinder
} [-emulation type>][-location ][-mp_blade_id
]
raidcom modify ldev -ldev_id
-ldev_name Create nickname of created LDEV.
This operation is arbitrary.
Creating LDEV
nickname (arbitrary) 16
raidcom modify ldev -ldev_id
-mp_blade_id Set MP blade of created LDEV. Setting MP blade of
LDEV 17
raidcom get ldev -ldev_id … [-cnt
] [-key ] Display information of created LDEV and
confirm the result of executing the
command. Displaying LDEV
information 18
raidcom add lun -port [name>] -ldev_id [-lun_id] Specify port, map LDEV to LUN and create
an LU path. Creating LU path 19
raidcom get lun -port [name>] Display LU path information and confirm
the result of executing the command. Displaying LU path
information 20
Script Examples
The following shows the script examples of external volume operations.
External volume operations 121