HP XP RAID Manager Software - Manual (Page 220)

Table 61 SSB codes that are returned by raidcom add device_grp command
raidcom add device_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
The number of device group in the system has reached the
maximum. 0009 2E22 Executing CMDRJE
The device name of an LDEV is duplicated in the system. 000A 2E22 Executing CMDRJE
The number of LDEVs that can be registered in a operation
exceeds the maximum. The number of LDEVs that can be
registered includes the number of LDEVs of a LUSE. 000E 2E22 Executing CMDRJE
It exceeds the number of device group in the system. 2100 2E23 Executing CMDRJE
The LDEV to be allocated to the device group is not set the device
name. 0051 2E30 Executing CMDRJE
The specified resource group ID of the LDEV cannot be registered
because it is different from other resource group ID of the LDEV
in the specified device group. 0072 2E30 Executing CMDRJE
An internal error occurred. FEEC 2EEA Executing CMDRJE
Call HP Technical Support.
Table 62 SSB codes that are returned by raidcom modify ldev -ldev_name command
raidcom modify ldev -ldev_name
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
LDEV nickname is not specified. 0007 2E00 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
Unavailable character is included in LDEV nickname. - - Executing Invalid Character
Table 63 SSB codes that are returned by raidcom initialize ldev command
raidcom initialize ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a Business Copy pair. 0000 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair. 0001 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Asynchronous Get Command Status
The specified LDEV is used on the system disk. 0008 2E10 Asynchronous Get Command Status
LDEV is not blocked. 0010 2E10 Asynchronous Get Command Status
220 Troubleshooting