HP XP RAID Manager Software - Manual (Page 246)

Table 83 SSB codes that are returned by raidcom add thp_pool command (continued)
raidcom add thp_pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The operation cannot be performed because the memory
capacity of the shared memory (SM) is insufficient. 8103 2E21 Async Get Command Status
Thin Provisioning program product is not installed. 9007 2E21 Executing CMDRJE
Exceeded the number of pool volume that can be registered in
a pool. 0005 2E22 Async Get Command Status
The larger number of drive types than the supported
configuration cannot be added to the specified pool. 000D 2E22 Async Get Command Status
Pool volume cannot be registered because the drive type of
specified LDEV is different from the other pool volume type, or
the drive type in the pool exceeds three. 6100 2E22 Async Get Command Status
The emulation type of specified LDEV cannot be used as a pool
VOL. 0000 2E30 Async Get Command Status
The specified LDEV has the LU path definition. 0007 2E30 Async Get Command Status
The specified LDEV is used as a External Storage Access
Manager quorum disk. 000C 2E30 Async Get Command Status
The specified LDEV is used as a system disk. 000D 2E30 Async Get Command Status
The specified LDEV is already used as a pool volume. 000E 2E30 Async Get Command Status
The specified LDEV is a command device. 0010 2E30 Async Get Command Status
It cannot be used as a pool volume because the size of specified
LDEV is less than 8GB. 0038 2E30 Async Get Command Status
The specified LDEV is used as a V-VOL. 005C 2E30 Async Get Command Status
The specified LDEV is a volume of unsupported Smart Tiers. 005D 2E30 Async Get Command Status
The specified LDEV is used in another program product. 005E 2E30 Async Get Command Status
An LDEV, whose emulation type is not available to be mixed,
is in the specified LDEVs. 006C 2E30 Executing CMDRJE
The operation cannot be done for the following reasons: 006E 2E30 Async Get Command Status
• The pool volumes to be added to the Smart Tiers pool include
external volumes whose cache modes are invalid.
•
The Thin Provisioning pool includes both external volumes
whose cache modes are invalid and internal volumes.
The resource group ID of the specified volume cannot be
registered because the resource group ID is different from the 0071 2E30 Executing
Async
CMDRJE
Get Command Status
resource group ID of the other pool volume in the specified pool
ID.
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Async Get Command Status
The threshold value 1 is out of range. 6000 2E30 Executing CMDRJE
The specified pool attribute differs from the pool attribute of
existed pool. 6004 2E30 Async Get Command Status
The RAID level of the specified LDEV is different with the RAID
level of others. 0015 2E31 Async Get Command Status
There is a blocked pool volume. 0016 2E31 Async Get Command Status
246 Troubleshooting