HP XP RAID Manager Software - Manual (Page 195)

Table 41 Command error messages (continued)
Value Recommended action Condition Error
message
Error code
247 Verify the device or group name and
add it to the configuration file of the
remote and local hosts. The designated device or
group name does not exist
in the configuration file. No such device or
group EX_ENOENT
246 Verify the device name and add it
to the configuration file of the remote
and local hosts. The designated device name
does not exist in the
configuration file. No such device EX_ENODEV
219 Verify the RAID unit ID and add it to
the configuration file of the remote
and local hosts. The designated RAID unit ID
does not exist in the
configuration file. No such RAID unit EX_ENOUNT
218 Please confirm serial# (Seq#) using
the pairdisplay command, or The group designated by
Business Copy paircreate
does not have the same Unmatched Serial#
vs RAID unitID EX_ENQSER
confirm serial# (Seq#) of the RAID
RAID unit, or the unitID is not storage system using the raidqry
-r command identical to the unit ID in the
same RAID serial# (Seq#).
245 Increase the virtual memory capacity
of the system, or close any Insufficient memory exists. Not enough core EX_ENOMEM
unnecessary programs and/or
daemon processes.
131 Confirm the execution right
permission, the extension, and the
execution path of the script file. The script file specified by
the -zt option cannot be
performed. Cannot execute
script file EW_ENESCR
244 Refer to the error message, and
designate an appropriate value. Tried to use arguments for
an option beyond the Result too large EX_ERANGE
maximum allowed, or a
result beyond the maximum
was created.
243 Call HP Technical Support. Undefined error. File name too long EX_ENAMLG
242 Please confirm that the HORC
Manager in the remote host is A timeout occurred on
remote communication, and No remote host alive
for remote EX_ENORMT
running, and then increase the value HORC Manager failed to
re-execute. commands or
remote HORCM
of the timeout in the configuration
file.
might be blocked
(sleeping) on an
existing I/O
241 Call HP Technical Support. Detected a contradiction for
a command. Invalid RAID
command mode EX_INVMOD
240 Call HP Technical Support. Detected a contradiction for
a command. Invalid RAID
command EX_INVCMD
239 Verify the device or group name and
add it to the configuration file of the
remote and local hosts. The designated device or
group name does not exist
in the configuration file, or No such group EX_ENOGRP
the network address for
remote communication does
not exist.
238 Call HP Technical Support. Detected a contradiction for
a command. Unknown function
code EX_UNWCOD
237 Refer to the host syslog file, and
investigate the cause of the error. A read/write to the
command device failed with
an I/O error. Control command
I/O error EX_CMDIOE
If the problem persists, collect the
log information of HORCM
Error messages and error codes 195