HP XP RAID Manager Software - Manual (Page 197)

Table 41 Command error messages (continued)
Value Recommended action Condition Error
message
Error code
234 Please issue the pairresync
command manually to the identified Detected a suspended status
(PSUE) for the paired
volume, before it made it to
the designated status. Pair suspended at
WAIT state EX_EWSUSE
failed paired volume to try to recover
it. If the trouble persists, contact HP
Technical Support.
233 Please increase the value of the
timeout using the -t option. Detected a time out, before
it made it to the designated
status. Timeout waiting for
specified status EX_EWSTOT
232 Please confirm that HORC Manager
on the remote host is running. Timeout error because the
remote did not notify about
expected status in time. Timeout waiting for
specified status on
the local host EX_EWSLTO
231 Please confirm the value of “poll” in
the configuration file. HORC Manager monitoring
was refused. HORCM Monitor
stopped EX_ESTMON
230 Please confirm the command name. An unknown command was
attempted. Unknown command EX_UNWCMD
229 Please confirm the pair status using
the pairdisplay command. The pair status of a volume
within a group is not
identical to the status of the
other volumes in the group. Inconsistent status in
group EX_INCSTG
228 Please confirm the pair status using
the pairdisplay command. The pair status of the target
volume is not appropriate. Invalid pair status EX_INVSTP
222 Please confirm the pair status using
the pairdisplay -l command. The volume status of the
target volume is not
appropriate. Invalid volume status EX_INVVOL
220 Please confirm the MU# for the
specified group using the The MU# of the volume to
be operated is not
appropriate. Invalid mu# with
HORC or HOMRCF EX_INVMUN
pairdisplay command. MU #1/2
cannot be used for Continuous
Access Synchronous, and MU #1/2
must be P-VOL for Business Copy.
227 Please confirm that the Port, Target
ID, LUN are defined correctly under A device defined in the
configuration file does not No such LDEV within
the RAID EX_ENLDEV
HORCM_DEV in the configuration
file. have a mapping to a real
LUN and target ID within the
RAID storage system.
226 Call HP Technical Support. Wrong return code. Invalid return code EX_INVRCD
225 Check the volume list to see if an
operation was directed to the wrong
S-VOL. Currency check error for
S-VOL. Cannot guarantee
identical data on S-VOL. S-VOL currency error EX_VOLCUR
224 Please confirm the pair status of the
local volume. The volume specified with
the S-VOL-takeover Local volume
currency error EX_VOLCUE
command is not the same as
the P-VOL.
223 Please confirm the pair status of
remote and local volumes using the
pairdisplay
command.
The combination of the
volumes specified with
Swap-takeover is unsuitable. Local and remote
vol. currency error EX_VOLCRE
-- Call HP Technical Support. Wrong error code. Unknown error
code. EX_UNWERR
Error messages and error codes 197