HP XP RAID Manager Software - Manual (Page 105)

Command Description Operation Step
raidcom modify host_grp -port
[] -host_mode < host Specify port and set host mode for host
group. Setting host mode 3
mode> [-host_mode_opt option> … ]
raidcom get host_grp -port [group name>] Display host group information and confirm
result of executing command. Displaying host
group information 4
raidcom add hba_wwn -port [group name>] -hba_wwn Register host to host group of the port. Adding host to host
group 5
raidcom get hba_wwn -port [group name>] Display WWN of connection host
registered to the host group and confirm
the result of executing the command. Displaying WWN
information 6
raidcom add ldev -parity_grp_id
-ldev_id -capacity Specify a parity group and create LDEV. Creating LDEV 7
[-emulation type>][-location ][-mp_blade_id
]
raidcom initialize ldev -ldev_id
-operation Format created LDEV. Formatting LDEV 8
raidcom modify ldev -ldev_id
-ldev_name Create nickname for created LDEV.
This operation is arbitrary.
Creating LDEV
nickname (arbitrary) 9
raidcom modify ldev -ldev_id Set MP blade of created LDEV. Setting MP blade of
LDEV 10
-mp_blade_id
raidcom get ldev -ldev_id … [-cnt
] [-key ] Display information of created LDEV and
confirm the result of executing the
command. Displaying LDEV
information 11
raidcom get ldev -ldev_id … [-cnt
] [-key ] Specify port, map LDEV to LUN and create
an LU path. Creating LU path 12
raidcom get lun -port [name>] Display LU path information and confirm
the result of executing the command. Displaying LU path
information 13
Creating internal volumes (Mainframe volume)
To create LDEVs of internal volumes (Mainframe volume) and make the LDEVs available to the host,
perform the following provisioning operations.
Command Description Operation Step
raidcom modify ldev -ldev_id
-ssid Configures the SSID unless it is
configured. Set (register) the SSID SSID settings
(arbitrarily) 1
by specifying undefined LDEV
numbers in the area in which SSIDs
are not defined.
raidcom add ldev -parity_grp_id
-ldev_id {-capacity | Creates LDEVs by specifying parity
groups. Creating LDEVs 2
-offset_capacity | -cylinder }
[-emulation ][-location
][-mp_blade_id ]
raidcom initialize ldev -ldev_id
-operation Formats created LDEVs. Formatting LDEVs 3
raidcom modify ldev -ldev_id -ldev_name
Creates LDEV nicknames. This
operation is optional. Creating LDEV
nicknames
(arbitrarily) 4
Internal volume operations 105