HP XP RAID Manager Software - Manual (Page 94)

Table 24 Asynchronous commands of the configuration setting command (continued)
Command syntax Function
raidcom add journal -journal_id {-ldev_id …[-cnt ]
| -grp_opt -device_grp_name [name>]} Creating Journal/ registering journal volume
the journal
raidcom delete journal -journal_id [-ldev_id | -grp_opt
-device_grp_name []] Deleting Journal/ Deleting journal volume
from the journal
raidcom check_ext_storage path -path_grp -port
-external_wwn Restoration of path for the external path.
raidcom add path -path_grp -port -external_wwn strings> Setting the external path
raidcom add external_grp -path_grp -external_grp_id
-port -external_wwn -lun_id [-emulation type>] Mapping the External Volume
raidcom delete path -path_grp -port -external_wwn strings> Deleting the external path
raidcom delete external_grp -external_grp_id Releasing the mapping of the external
volume
raidcom disconnect path -path_grp -port -external_wwn
Stopping the use of paths to the external
volume
Help on configuration setting commands
To see the configuration setting command help, execute any command using the -h option, for
example, raidcom - h.
raidcom -h
LDEV nickname function
As a function of configuration setting command, a nickname (device name) can be set for each
LDEV.
The details of the definition for the LDEV nickname function are shown below.
The length of a device name must be up to 32 characters. For one LDEV, one nickname can be
defined.
A nickname can be defined by specifying as the following.
raidcom modify ldev -ldev_id -ldev_name
Available provisioning operations
The following provisioning operations can be performed using RAID Manager.
Corresponding command Description Operation type
raicom ogin Log in. Login and logout
raidcom -logout Log out.
raidcom lock resource -resource_name
[-time ] Lock resource. Resource
raidcom unlock resource -resource_name
Unlock resource.
94 Provisioning operations with RAID Manager