HP XP RAID Manager Software - Manual (Page 136)

Table 28 Pair status versus Continuous Access Synchronous and Continuous Access Journal commands
Continuous Access Synchronous command -
pairresync pairsplit paircreate
Resync -S option -P option -r or -rw option Nocopy Copy Status #
Rejected Acceptable Rejected Rejected Accepted 3 Accepted 2 SMPL 1
Acceptable Accepted 1 Rejected. Accepted 4 Acceptable Acceptable COPY 2
Acceptable Accepted 1 Accepted 4 Accepted 4 Acceptable Acceptable PAIR 3
Accepted 2* Accepted 1 Acceptable Acceptable Rejected Rejected PSUS 4
Accepted 2 * Accepted 1 Rejected Rejected Rejected Rejected PSUE 5
Accepted 2* Accepted 1 Rejected Rejected Rejected Rejected PDUB 6
*In the case of the SSWS state after SVOL-SSUS-takeover, the pairresync command (from PVOL to SVOL) is rejected because
the delta data for SVOL becomes dominant, and its state is expected to be using the -swaps(p) option of pairresync. If the
pairresync command (from PVOL to SVOL) is rejected, confirm this special state using the -fc option of the pairdisplay command.
Legend
Accepted: Accepted and executed. When the operation terminates normally, the status changes to the indicated number.
Acceptable: Accepted but no operation is executed.
Rejected: Rejected and operation terminates abnormally.
Pairsplit of a Continuous Access Asynchronous volume is returned after verification of state transition
that waits until delta data is synchronized from P-VOL to S-VOL.
Table 29 Pair status versus Business Copy commands
Business Copy command -
pairresync pairsplit paircreate
Resync -S option -C option -E option -split No -split Pair Status
Rejected Acceptable Rejected Rejected Accepted 2 to 4 Accepted 2 SMPL 1
Acceptable Accepted 1 Accepted [1] 2
to 4 Accepted 5 Accepted [1] 2
to 4 Acceptable COPY
RCPY 2
Acceptable Accepted 1 Accepted [2] 2
to 4 Accepted 5 Accepted [2] 2
to4 Acceptable PAIR 3
Accepted 2 Accepted 1 Acceptable Accepted 5 Acceptable Rejected PSUS 4
Accepted 2 Accepted 1 Rejected Acceptable Rejected Rejected PSUE 5
Legend:
Accepted = Accepted and executed. When the operation terminates normally, the status changes to the indicated number.
Acceptable = Accepted but no operation is executed.
Rejected = Rejected and operation terminates abnormally.
In the following descriptions, when the pair statuses of P-VOL and S-VOL are different, PVOL_ or
SVOL_ are applied to show which volume is indicated.
136 Data replication operations with RAID Manager