HP XP RAID Manager Software - Manual (Page 219)

Table 58 SSB codes that are returned by raidcom modify journal command (continued)
raidcom modify journal
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The specified volume cannot be used as a journal volume
because it is an external volume that can execute the I/O
suppression mode. 0062 2E30 Asynchronous Get Command Status
The timer type cannot be changed because the specified journal
belongs to the extended CT group. 5001 2E30 Executing CMDRJE
The parameter of inflow control cannot be changed because
the specified journal is not a primary journal. 5003 2E30 Executing CMDRJE
The cache mode option or the data overflow monitoring time
cannot be changed because the specified journal is used by
both the primary and the secondary journals. 5005 2E30 Executing CMDRJE
An internal error occurred. 50EE 2EE4 Executing CMDRJE
Call HP Technical Support.
Table 59 SSB codes that are returned by raidcom modify ldev -mp_blade_id command
raidcom modify ldev -mp_blade_id
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The number of LDEV exceeded the range. 0000 2E00 Executing CMDRJE
MP Blade ID is not in the effective range. 8301 2E00 Executing CMDRJE
The specified MP Blade is blocked. 8300 2E10 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
The specified MP Blade is not installed. 8300 2E20 Executing CMDRJE
Table 60 SSB codes that are returned by raidcom delete device_grp command
raidcom delete device_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
LDEV is not registered in the device group. 0002 2E20 Executing CMDRJE
A device group is not installed. 2100 2E20 Executing CMDRJE
The number of LDEVs that can be deleted in a operation exceeds
the maximum. The number of LDEVs that can be deleted includes
the number of LDEVs of a LUSE. 000E 2E22 Executing CMDRJE
Error messages and error codes 219