HP XP RAID Manager Software - Manual (Page 236)

Table 77 SSB codes returned by raidcom add snapshot (continued)
raidcom add snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
A Fast Snap or Snapshot pair cannot be created because
the Thin Provisioning V-VOL in capacity expanding is
specified as the P-VOL of a Fast Snap or Snapshot pair. 0041 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
the Thin Provisioning V-VOL that is discharging zero data
is specified as the P-VOL of a Fast Snap or Snapshot pair. 0042 2E10 Executing CMDRJE
A pair cannot be created because the P-VOL of a
Continuous Access Synchronous pair is specified as the
S-VOL of a Fast Snap or Snapshot pair. 0045 2E10 Executing CMDRJE
A pair cannot be created because the S-VOL of a
Continuous Access Synchronous pair is specified as the
S-VOL of a Fast Snap or Snapshot pair. 0046 2E10 Executing CMDRJE
The command ends abnormally because the Business Copy
pair is being resynchronized when the volume is shared 0049 2E10 Executing CMDRJE
between the P-VOL of a Fast Snap/Snapshot pair and the
P-VOL of a Business Copy pair.
The command ends abnormally because the Business Copy
pair status is other than PSUS when the volume is shared 004A 2E10 Executing CMDRJE
between P-VOL of a Fast Snap/Snapshot pair and the
S-VOL of a Business Copy pair.
The operation cannot be performed because the Quick
Restore is being operated on the specified Business Copy
P-VOL. 004E 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair with the specified consistency
group number cannot be created due to one of the
following reasons: 2300 2E10 Executing CMDRJE
• The specified consistency group number is used by the
Business Copy.
•
The number of pairs that can be defined in a consistency
group exceeds the maximum.
• The pair created by using the same P-VOL already exists
in the specified consistency group.
A Fast Snap pair specifying CTG mode cannot be created
because the maximum number of consistency groups has
already been defined. 2302 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created due to
unavailable of the pool. 6018 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
there are not enough pair tables. 8100 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
there are not enough differential tables. 8101 2E10 Executing CMDRJE
A pair cannot be created because there are not enough
free shared memory space. 8102 2E10 Executing CMDRJE
The command ends abnormally because the pair is in the
state of unacceptable the command. 9701 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
the number of Fast Snap or Snapshot pairs has already
reached the maximum. 9705 2E10 Executing CMDRJE
236 Troubleshooting