HP XP RAID Manager Software - Manual (Page 198)

Table 41 Command error messages (continued)
Value Recommended action Condition Error
message
Error code
217 Choose an existing CTGID (use
pairvolchk
to display CTGIDs).
CTGID could not be
registered due to being
beyond the max number of Not enough CT
groups in the RAID EX_ENOCTG
Use the ‘-f async ‘ option
CT groups (0-255 for of the paircreate command to
XP24000/XP20000 Disk force the pair into a pre-existing
CTGID.
Array, 0-255 for XP12000
Disk Array/XP10000 Disk
Array, 0-127 for
XP1024/XP128 Disk Array,
0-15 for 7700E)) for an
async volume.
216 Please confirm the serial # of the
volumes by using the pairdisplay A Continuous Access
Asynchronous or Business
Copy volume is defined in Extended CT group
across RAIDs EX_EXTCTG
command to verify that the CT group
the configuration file is contained completely within one
RAID storage system.
(HORCM_CONF) as a
group that extends across
storage systems.
215 Please confirm whether all CT groups
are already used by mainframe An available CT group for
OPEN Volume does not exist No CT groups left
for OPEN Vol use. EX_ENXCTG
volumes (Cnt Ac-S and Continuous
Access Asynchronous, and BC). (Continuous Access
Asynchronous or Business
Copy).
214 Please confirm the CTGID using the
pairvolchk
command and/or
The CT group references
within a group do not have
an identical CTGID. Unmatched CTGID
within the group EX_ENQCTG
confirm that group references within
the configuration file
(HORCM_CONF) see the same CT
group.
213 Please confirm whether
pair-operation is permitted on the A device mentioned in the
configuration file does not Permission denied
with the LDEV EX_ENPERM
device by using the pairdisplay have a permission for a
pair-operation.
or raidscan -find verify
command.
212 Please confirm volume size or
number of LUSE volume using the Size of a volume is
unsuitable between the
remote and local volume. Unmatched volume
size for pairing EX_ENQSIZ
‘raidscan -f’ command, and make
sure the volume sizes are identical.
211 Please confirm if the type of storage
system is permitted for a RAID A storage system (RAID)
mentioned in the Permission denied
with the RAID EX_ERPERM
Manager by using the inqraid
-CLI
and raidqry -h commands.
configuration file does not
have a permission for RAID
Manager.
209 Please confirm whether a target
volume is setting to S-VOL disabling A specified target volume for
S-VOL is denied to become S-VOL denied due to
be disabling EX_ES-VOLD
y using inqraid -fl or S-VOL by the setting of Data
Retention.
raidvchkscan -v gflag
command.
210 Please confirm the microcode version
by using the raidqry -l
command. The storage system does not
support a function for RAID
Manager. Micro code not
supported EX_ENOSUP
208 Please confirm the retention time for
a target volume that is set to Data A target volume is denied to
be changing due to retention
time via LDEV guarding. Mode changes
denied due to
retention time EX_EPRORT
Retention by using raidvchkscan
-v gflag
command.
198 Troubleshooting