HP XP RAID Manager Software - Manual (Page 208)

Table 48 SSB codes that are returned by raidcom delete external_grp command (continued)
raidcom delete external_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The external volume is used as a Auto LUN V2 VOL. 4111 2E30 Asynchronous Get Command Status
The external volume is used as a Auto LUN V2 VOL. 4112 2E30 Asynchronous Get Command Status
The target external group cannot be deleted because a ESAM
Quorum disk exists in it. 0001 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred. FFFB 2EE8 Asynchronous Get Command Status
Call HP Technical Support.
An internal error occurred. 41FF 2EFF Asynchronous Get Command Status
Call HP Technical Support.
Table 49 SSB codes that are returned by raidcom check_ext_storage path command
raidcom check_ext_storage path
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The path group is not in the enabled range. 4500 2E00 Executing CMDRJE
The value of the port is not enabled. 8400 2E00 Executing CMDRJE
The specified external volume has already disconnected the
path, or is in the process of checking path. 4301 2E10 Asynchronous Get Command Status
The target LDEV is blocked. 001B 2E11 Asynchronous Get Command Status
The path for the specified external path is in the state of
disconnected. 4000 2E11 Asynchronous Get Command Status
All the paths for the specified external path are blocked. 4302 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
There is no specified external volume. 4100 2E20 Asynchronous Get Command Status
There is no specified path. 4300 2E20 Asynchronous/ Get Command Status
Executing CMDRJE
WWN is not registered. 4400 2E20 Executing CMDRJE
The path group is not registered. 4500 2E20 Executing CMDRJE
The path group does not exist. 4500 2E20 Executing CMDRJE
Online from the mainframe host. 001E 2E30 Asynchronous Get Command Status
The port attribute is not External (ELUN). 8400 2E30 Executing CMDRJE
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred by the operation of external path. 0905 2EDA Asynchronous Get Command Status
Call HP Technical Support.
208 Troubleshooting