HP XP RAID Manager Software - Manual (Page 251)

Table 87 SSB codes that are returned by raidcom delete rcu command (continued)
raidcom delete rcu
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The command cannot be accepted. After a while, execute the
same command. 00EE 2ED6 Executing CMDRJE
An internal error occurred. 3005 2ED6 Asynchronous Get Command Status
Call HP Technical Support.
The value of SSID on the remote storage system is invalid. 3300 2ED6 Executing CMDRJE
RCU storage system does not exist. 00D1 2EDE Executing CMDRJE
The specified parameter is invalid. Check the HP P9000 RAID
Manager Reference Guide. 3002 2EF3 Executing CMDRJE
Table 88 SSB codes that are returned by raidcom add rcu command
raidcom add rcu
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The value of CU# on the RCU exceeds the effective range. 3001 2E00 Executing CMDRJE
Invalid product ID or path registration ID. 3005 2E00 Executing CMDRJE
Command cannot be executed because the parameter of
specified RCU is invalid. 3008 2E00 Asynchronous Get Command Status
Command cannot be executed because all the CU numbers in
the RCU is not unified at the path that is specified creation or
deletion. 3009 2E00 Asynchronous Get Command Status
The value of port# on the side of RCU is invalid. 3200 2E00 Executing CMDRJE
The value of CU number is not enabled. 7100 2E00 Executing CMDRJE
/Asynchronous Get Command Status
The value of specified port is invalid. 8400 2E00 Executing CMDRJE
/Asynchronous Get Command Status
Failed to establish a path or the deletion operation. The following
factor can be thought. 3101 2E10 Asynchronous Get Command Status
•
Input parameter is invalid.
• Port status or the MP Blade status is in the state of abnormal.
•
Cable is not connected correctly.
• Port is specified incorrectly.
The operation cannot be done because the microcode is being
changed. 8004 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The serial number, the product ID, or the SSID of the target
storage system is incorrect. 3000 2E20 Async Get Command Status
The specified CU number is not defined, or an LDEV is not
defined under the CU number. 7101 2E21 Asynchronous Get Command Status
The specified RCU is already registered to another product ID. 3001 2E22 Asynchronous Get Command Status
Error messages and error codes 251