HP XP RAID Manager Software - Manual (Page 213)

Table 55 SSB codes that are returned by raidcom add ldev command (continued)
raidcom add ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
Failed to restore the LDEV that is created to external volume
group. 1005 2E00 Asynchronous Get Command Status
The specified pool ID is not in the effective range. 6000 2E00 Executing CMDRJE
The specified CLPR number is not in the effective range. 7000 2E00 Executing CMDRJE
MP Blade ID is not in the effective range. 8301 2E00 Executing CMDRJE
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Executing CMDRJE
The operation cannot be done because the total capacity of
virtual volumes for Smart Tiers in the system exceeds the
maximum. 001F 2E10 Asynchronous Get Command Status
The volumes cannot be added because the check sum of the
encryption key is not coincident. 0100 2E10 Asynchronous Get Command Status
The specified pool be associated with the virtual volume of Thin
Provisioning because the state of the pool is incorrect. 6014 2E10 Executing
/Asynchronous
CMDRJE
Get Command Status
An LDEV that is in the state of shredding is included in the parity
group of the target LDEV. 0003 2E11 Asynchronous Get Command Status
An LDEV that is in the state of formatting is included in the parity
group of the target LDEV. 0004 2E11 Asynchronous Get Command Status
An LDEV that is in the state of executing quick format is included
in the parity group of the target LDEV. 0005 2E11 Asynchronous Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The volumes cannot be added because the encryption value of
the key number that is set to encryption ECC is invalid. 0101 2E11 Asynchronous Get Command Status
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Asynchronous Get Command Status
The parity group or the external volume group that the specified
LDEV is belongs to is used in another operation. 0153 2E11 Executing CMDRJE
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Asynchronous Get Command Status
The storage system is in internal process, or the configuration
changing processes are conflicting. 8010 2E11 Executing CMDRJE
Cache segment size is incorrect. 8105 2E11 Asynchronous Get Command Status
The operation cannot be done because there is blocked part in
the system. 8108 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified CLPR does not exit. 0007 2E20 Executing CMDRJE
Asynchronous Get Command Status
There is no parity group. 0100 2E20 Executing CMDRJE
Pool ID is invalid. 6000 2E20 Executing CMDRJE
Asynchronous Get Command Status
Error messages and error codes 213