HP XP RAID Manager Software - Manual (Page 110)

Executed command Description Operation overview Step
mode> [-host_mode_opt option> … ]
raidcom get host_grp -port [group name>] Display host group information and confirm
result of executing command. Displaying host
group information 4
raidcom add hba_wwn -port [group name>] -hba_wwn Register host to host group of the port. Adding host to host
group 5
raidcom get hba_wwn -port [group name>] Display WWN of connection host
registered to the host group and confirm
the result of executing the command. Displaying WWN
information 6
raidcom add ldev parity_grp_id
-ldev_id {-capacity Specify a parity group and create LDEV. Creating LDEV 7
| -offset_capacity | -cylinder
} [-emulation type>][-location ][-mp_blade_id
]
raidcom initialize ldev -ldev_id
-operation Format created LDEV. Formatting LDEV 8
raidcom modify ldev -ldev_id
-ldev_name Create nickname for LDEV.
This operation is arbitrary.
Creating LDEV
nickname (arbitrary) 9
raidcom modify ldev -ldev_id
-mp_blade_id Set MP blade of created LDEV. Setting MP blade of
LDEV 10
raidcom get ldev -ldev_id … [-cnt
] [-key ] Display information of created LDEV and
confirm the result of executing the
command. Displaying LDEV
information 11
raidcom add thp_pool {{-pool_id ID#> [-pool_name ] | Create pool (for Thin Provisioning). Creating pool (for
Thin Provisioning) 12
-pool_name [-pool_id ID#>]} | -pool_id -pool_name
}} -ldev_id …[-cnt
][-user_threshold
[]]
raidcom add ldev -pool { |
| snap} -ldev_id Specify pool and create an LDEV(V-VOL). Creating LDEV
(V-VOL) 13
{-capacity | -offset_capacity
| -cylinder } [-emulation type>][-location ][-mp_blade_id
]
raidcom modify ldev -ldev_id
-ldev_name Create nickname for the created LDEV.
This operation is arbitrary.
Creating LDEV
(V-VOL) nickname
(arbitrary) 14
raidcom modify ldev -ldev_id Set MP blade of created LDEV (V-VOL). Setting MP blade of
LDEV (V-VOL) 15
-mp_blade_id
raidcom get ldev -ldev_id … [-cnt
] [-key ] Display information of created LDEV
(V-VOL) and confirm the result of executing
the command. Displaying LDEV
information (V-VOL) 16
raidcom add lun -port [host group
name] -ldev_id [-lun_id ] Specify port, map LDEV to LUN and create
an LU path. Creating LU path 17
raidcom get lun -port [name>] Display LU path information and confirm
the result of executing the command. Displaying LU path
information 18
110 Provisioning operations with RAID Manager