HP XP RAID Manager Software - Manual (Page 221)

Table 63 SSB codes that are returned by raidcom initialize ldev command (continued)
raidcom initialize ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The specified LDEV is a CC/XRC attribute device. 0012 2E10 Asynchronous Get Command Status
The formatting operation cannot be done because the check
sum of the encryption key is not coincident. 0100 2E10 Asynchronous Get Command Status
The LDEV is in shredding. 0007 2E11 Asynchronous Get Command Status
The operation cannot be done because LDEV is now expanding. 0009 2E11 Asynchronous Get Command Status
The operation cannot be done because the virtual disk space is
blocked. 001E 2E11 Asynchronous Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The formatting operation cannot be done because the encryption
value of the key number that is set to encryption ECC is invalid. 0101 2E11 Asynchronous Get Command Status
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Asynchronous Get Command Status
The parity group or the external volume group to which the
specified LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool. 6004 2E11 Asynchronous Get Command Status
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume. 6006 2E11 Asynchronous Get Command Status
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The processing stopped because aborting processing is required. 0000 2E14 Asynchronous Get Command Status
LDEV is not installed. 0000 2E20 Executing CMDRJE
The program product is not installed. 9011 2E21 Executing CMDRJE
The quick format cannot be performed because the total number
of parity groups in which the LDEVs in quick formatting or the 0100 2E22 Asynchronous Get Command Status
LDEVs blocked while quick formatting are implemented exceeds
the maximum number performed that can be at the same time.
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Asynchronous Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Asynchronous Get Command Status
The specified LDEV is used as a journal volume. 000F 2E30 Asynchronous Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Asynchronous Get Command Status
Quick format cannot be done because the target LDEV is not an
internal volume. 002D 2E30 Asynchronous Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Asynchronous Get Command Status
The specified LDEV is a pool volume and the pool volume include
the Thin Provisioning volume that is not in the blocked status. 0061 2E30 Asynchronous Get Command Status
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Asynchronous Get Command Status
Error messages and error codes 221