HP XP RAID Manager Software - Manual (Page 178)

Offline backup using raidscan-find sync for Windows file system:
The raidscan-find sync command flushes the system buffer associated with a logical drive
through finding a Volume{guid} corresponding to a group of the configuration file, without using
the -x mount and -x umount commands. The following examples are for group ORB.
S-VOL Side P-VOL Side
Close all logical drives on the P-VOL by application. •
Flush the system buffer for NEW S-VOL data using raidscan
-pi $Volume -find sync -g ORB.
• Flush the system buffer for P-VOL using raidscan -pi
$Volume -find sync -g ORB.
•
Back up the S-VOL data.
•
Split the paired volume using pairsplit -g ORB with
r/w mode. •
Flush the system buffer for S-VOL updates using raidscan
-pi $Volume -find sync -g ORB when the backup is finished.
• Open all logical drives on the P-VOL by application.
•
Resynchronize the paired volume using pairresync
-g ORB.
Online backup using raidscan-find sync for Windows file system:
The raidscan-find sync command flushes the system buffer associated with a logical drive
through finding a Volume{guid} corresponding to a group of the configuration file, without using
the -x mount and -x umount commands. The following examples are for group ORB.
S-VOL Side P-VOL Side
Freeze DB on opening P-VOL by application. •
Flush the system buffer for NEW S-VOL data using raidscan
-pi $Volume -find sync -g ORB .
•
Flush the system buffer for P-VOL using raidscan
-pi $Volume -find sync -g ORB .
• Back up the S-VOL data.
• Splits the paired volume using pairsplit -g ORB
with r/w mode. •
Flush the system buffer for S-VOL updates using raidscan -pi
$Volume -find sync -g ORB when the backup is finished.
•
Unfreeze DB on opening P-VOL by application.
•
Resynchronize the paired volume using pairresync
-g ORB.
Offline backup using raidscan-find sync for Windows NT file system:
The raidscan-find sync command flushes the system buffer through finding a logical drive
corresponding to a group of the configuration file, without using the -x mount and -x umount
commands. The following examples are for group ORB.
S-VOL Side P-VOL Side
Close all logical drives on the P-VOL by application. •
Back up the S-VOL data.
•
Flush the system buffer for P-VOL using raidscan -pi
$LETALL -find sync -g ORB. • Flush the system buffer for S-VOL updates using raidscan
-pi $LETALL -find sync -g ORB when the backup is finished.
• Split the paired volume using pairsplit -g ORB with
r/w mode.
•
Open all logical drives on the P-VOL by application.
• Resynchronize the paired volume using pairresync
-g ORB.
Online backup using raidscan-find sync for Windows NT file system:
178 Examples of using RAID Manager commands