HP XP RAID Manager Software - Manual (Page 206)

Table 46 SSB codes that are returned by raidcom add external_grp command (continued)
raidcom add external_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
Exceeded the number of mapping that can be set per 1 port. 4102 2E23 Asynchronous Get Command Status
The operation cannot be done because the number of path in
the path group exceeds 8. 4303 2E23 Asynchronous Get Command Status
The external volume cannot be added because the number of
virtual volumes that can be created in the system exceeded the
maximum number. 4119 2E30 Asynchronous Get Command Status
The specified external LU has mapped already. 4201 2E30 Asynchronous Get Command Status
The port attribute is not External. 8400 2E30 Executing CMDRJE
The specified external storage LU is the device of not supported. 4000 2E31 Asynchronous Get Command Status
The specified external storage system is not supported. 4001 2E31 Asynchronous Get Command Status
The usage capacity exceeds the licence capacity of the program
product. 9000 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred. 41FA 2EDA Asynchronous Get Command Status
The specified parameter is invalid. Check the HP P9000 RAID
Manager Reference Guide. 4102 2EF3 Executing CMDRJE
Table 47 SSB codes that are returned by raidcom check_ext_storage external_grp command
raidcom check_ext_storage external_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The external volume group is not in the effective range. 4100 2E00 Executing CMDRJE
The specified external volume has already disconnected the
path, or is in the process of checking path. 4301 2E10 Executing CMDRJE
The target LDEV is blocked. 001B 2E11 Executing CMDRJE
The path for the specified external path is in the state of
disconnected. 4000 2E11 Executing CMDRJE
All the paths for the specified external path are blocked. 4302 2E11 Executing CMDRJE
There is no external volume group. 4100 2E20 Executing CMDRJE
There is no external path. 4300 2E20 Executing CMDRJE
Online from the mainframe host. 001E 2E30 Executing CMDRJE
An internal error occurred by the operation of external path. 0905 2EDA Asynchronous Get Command Status
Call HP Technical Support.
An internal error occurred by the operation of external volume. 0905 2EDA Executing CMDRJE
Call HP Technical Support.
206 Troubleshooting