HP XP RAID Manager Software - Manual (Page 203)

Table 44 Specific error codes
Value Error message Error code Category
236 Unmatched volume status within the group EX_ENQVOL Volume Status
(Unrecoverable)
229 Inconsistent status in group EX_INCSTG
222 Invalid volume status EX_INVVOL
235 Pair Volume combination error EX_EVOLCE
228 Invalid pair status EX_INVSTP
225 S-VOL currency error EX_VOLCUR
224 Local Volume currency error EX_VOLCUE
223 Local and Remote Volume currency error EX_VOLCRE
234 Pair suspended at WAIT state EX_EWSUSE
212 Unmatched volume size for pairing EX_ENQSIZ
209 S-VOL denied due to be disabling EX_ES-VOLD
208 Mode changes denied due to retention time EX_EPRORT
233 Timeout waiting for specified status EX_EWSTOT Timer
(Recoverable)
232 Timeout waiting for specified status on the local host EX_EWSLTO
217 Not enough CT groups in the RAID EX_ENOCTG Resource
(Unrecoverable)
215 No CT groups left for OPEN Vol use. EX_ENXCTG
206 Not enough Pool in RAID EX_ENOPOL
SSB codes
An SSB code is error information that is output when an error occurs by executing a RAID Manager
command. The SSB code is output to the RAID Manager execution log file or to the console. Identify
the SSB code from an error code as follows:
•
SSB code that is output to the RAID Manager execution log file.
The following shows an example of a SSB code that is output to the RAID Manager execution
log file.
e.g.:11:06:03-37897-10413- SSB = 0xb9a0,2089
The alphanumeric characters after the equal sign shows an error code. The last four digits of
alphanumeric characters on the left side of the comma (,) is SSB1 (e.g.:b9ao), and the
alphanumeric characters on the right side is SSB2 (e.g.:2089).
•
SSB code that is output on the console.
The following shows an example of an SSB code that is output to the console.
Figure 77 An example of SSB code that is output to the console
The alphanumeric characters after the "SSB=" show an error code. The last four digits of
alphanumeric characters on the left side of comma (,) is SSB1 (e.g.:B9E1), and the last four
digits of alphanumeric characters on the right side is SSB2 (e.g.:B901).
Error messages and error codes 203