HP XP RAID Manager Software - Manual (Page 229)

Table 73 SSB codes that are returned by raidcom modify pool command
raidcom modify pool
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The value of pool ID is invalid. 6000 2E00 Executing CMDRJE
The specified pool is for Snapshot. 6001 2E00 Executing CMDRJE
The value of maximum reserve ratio is out of range, or it falls
below the maximum reserve ratio of the V-VOL. 6002 2E00 Executing CMDRJE
The specified Tier Range value is invalid. 6003 2E00 Executing CMDRJE
Relations between the specified lower limit of Tier Range and
the Delta value is invalid. 6004 2E00 Executing CMDRJE
The specified Tier capacity threshold value is out of range. 6006 2E00 Executing CMDRJE
The threshold of the specified High water mark is out of range. 6009 2E00 Executing CMDRJE
The operation cannot be done because the specified threshold
of Warning is larger than the threshold of the specified High
water mark. 600A 2E00 Executing CMDRJE
The specified tier number is out of range. 6100 2E00 Executing CMDRJE
The operation cannot be done because the total capacity of
virtual volumes for Smart Tiers in the system exceeds the
maximum. 001F 2E10 Executing CMDRJE
The specified pool is in the state of blocked. 600B 2E10 Executing CMDRJE
The setting of the threshold value is less than the pool usage
value. 600C 2E10 Asynchronous Get Command Status
The operation cannot be done because it is in the state of
shrinking. 600D 2E10 Executing CMDRJE
The operation cannot be done because it is being discarded
pages. 6011 2E10 Executing CMDRJE
Pool cannot be restored because the usage rate of pool is 100%. 6012 2E10 Asynchronous Get Command Status
The operation cannot be done because the Tier is being deterred
reallocation. 6015 2E10 Executing CMDRJE
The operation cannot be done because collecting the
performance monitoring data is being prepared. 6017 2E10 Executing CMDRJE
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The Smart Tiers operations cannot be done to the pool because
the specified pool contains RAID 1 pool VOLs. 6000 2E13 Executing CMDRJE
The specified pool for Thin Provisioning cannot be changed to
a pool for Smart Tiers because the pool is related to TSE-VOL. 6002 2E13 Executing CMDRJE
Pool ID is not installed. 6000 2E20 Executing CMDRJE
The specified Tier number is invalid. 6101 2E20 Executing CMDRJE
SM for Thin Provisioning is not installed. 8101 2E21 Executing CMDRJE
The Smart Tiers operation cannot be done to the pool because
the specified pool contains the external volumes whose cache
mode is invalid. 006E 2E30 Executing CMDRJE
The specified pool is for Snapshot. 6003 2E30 Executing CMDRJE
Error messages and error codes 229