HP XP RAID Manager Software - Manual (Page 224)

Table 66 SSB codes that are returned by raidcom modify ldev -status nml command (continued)
raidcom modify ldev -status nml
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The operation cannot be done because LDEV is not expanding. 0009 2E11 Asynchronous Get Command Status
The operation cannot be done because the virtual disk space is
blocked. 001E 2E11 Asynchronous Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume. 6006 2E11 Asynchronous Get Command Status
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified LDEV is not installed. 0000 2E20 Executing CMDRJE
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Asynchronous Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Asynchronous Get Command Status
The specified LDEV is used as a reserved volume of Auto LUN. 0014 2E30 Asynchronous Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Asynchronous Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Asynchronous Get Command Status
LDEV cannot be restored because there is no connection path
to the normal external path. 0017 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
Table 67 SSB codes that are returned by raidcom modify ldev -status blk command
raidcom modify ldev -status blk
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceed the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a pair of Business
Copy/Compatible FlashCopy/Fast Snap/Snapshot/Auto LUN
V2. 0000 2E10 Asynchronous Get Command Status
The specified LDEV is used for a pair of Continuous Access
Synchronous or Continuous Access Journal. 0001 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Asynchronous Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Asynchronous Get Command Status
LDEV is not installed, or LDEV is not in the state of Normal. 0011 2E10 Executing CMDRJE
The specified LDEV is used at the concurrent copy or XRC. 0012 2E10 Asynchronous Get Command Status
224 Troubleshooting