HP XP RAID Manager Software - Manual (Page 223)

Table 64 SSB codes that are returned by raidcom modify ldev -command_device (continued)
raidcom modify ldev -command_device
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The command device cannot be set to the specified LDEV
because of the following causes. 0014 2E30 Executing CMDRJE
•
It is used as a Auto LUN.
•
The reserve attribute of a Auto LUN is configured.
The specified LDEV cannot be set because it has a reserve
attribute of a Data Retention. 0016 2E30 Executing CMDRJE
The specified volume cannot be used as a command device
because it is set by a Data Retention. 0019 2E30 Executing CMDRJE
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Executing CMDRJE
An internal error occurred. FEEC 2EE8 Executing CMDRJE
Call HP Technical Support.
Table 65 SSB codes that are returned by raidcom modify ldev -ssid command
raidcom modify ldev -ssid
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
SSID cannot be changed because there are LDEVs in the
boundary where the specified LDEV belongs. 0023 2E11 Executing CMDRJE
The specified SSID is used for the other boundary. 7201 2E22 Executing CMDRJE
An internal error occurred. Call HP Technical Support. FEEC 2EE8 Executing CMDRJE
The specified parameter is invalid. Check the HP P9000 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 66 SSB codes that are returned by raidcom modify ldev -status nml command
raidcom modify ldev -status nml
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a Business Copy pair. 0000 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair. 0001 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Asynchronous Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Asynchronous Get Command Status
LDEV is not blocked. 0010 2E10 Executing CMDRJE
The specified LDEV is a CC/XRC attribute device. 0012 2E10 Asynchronous Get Command Status
The specified LDEV is not formatted after it is used as the journal
volume. 001E 2E10 Asynchronous Get Command Status
Error messages and error codes 223