HP XP RAID Manager Software - Manual (Page 210)

Table 50 SSB codes that are returned by raidcom disconnect external_grp command (continued)
raidcom disconnect external_grp
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
Call HP Technical Support.
An internal error occurred by the operation of external volume. 0905 2EDA Executing CMDRJE
Call HP Technical Support.
Table 51 SSB codes that are returned by raidcom modify external_grp command
raidcom modify external_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
The external volume group is not in the effective range. 4100 2E00 Executing CMDRJE
The specified value of the load balance mode is invalid. 410F 2E00 Executing CMDRJE
MP Blade ID is not in the effective range. 8301 2E00 Executing CMDRJE
The specified MP Blade is blocked. 8300 2E10 Executing CMDRJE
The attribute cannot be changed because Auto LUN is being
executed. 4107 2E11 Executing CMDRJE
The load balance mode cannot be changed because the
alternative path mode is set to Single. 4303 2E11 Executing CMDRJE
The load balance mode cannot be changed because microcodes
of multiple versions are in the storage system. 800F 2E11 Executing CMDRJE
There is no external volume group. 4100 2E20 Executing CMDRJE
The specified MP Blade is not installed. 8300 2E20 Executing CMDRJE
Cache mode cannot be changed because there is an LDEV that
Cache Residency bind mode is set. 000C 2E31 Executing CMDRJE
Cache mode cannot be changed because the specified external
volume includes a pool volume or an LDEV that is used by LUSE. 4101 2E31 Executing CMDRJE
The cache mode cannot be changed because one of the
following applies to the specified external volume. 4107 2E31 Executing CMDRJE
•
A pool volume of the pool that consists of both external
volumes and internal volumes.
• A pool volume of the pool where the multi tier pool option
is enabled.
The attribute of the external volume cannot be changed from
the current cache mode to the specified cache mode. 4108 2E31 Executing CMDRJE
The attribute cannot be changed because the external volume
group is not mapped for online data migration. 4109 2E31 Executing CMDRJE
The specified command cannot be accepted because the
command is not supported. 00F1 2EDA Executing CMDRJE
An internal error occurred on the changing of an external volume
option. 0905 2EDA Executing CMDRJE
Call HP Technical Support.
210 Troubleshooting