Vls6000–series disk array, Environmental specifications, 323 environmental specifications – HP StorageWorks 6000 Virtual Library System User Manual
Page 323
VLS6000–series Disk Array
Specification
Item
59.7 cm x 48.8 cm x 8.8 cm (23.5 in x 19.2 in x 3.5 in)
Dimensions
•
Empty: 14 kg (32 lb)
•
Fully loaded: 24.6 kg (54.3 lb)
Weight
•
50 or 60 Hz (nominal)
•
47 to 63 Hz (range)
Input frequency (±5%)
•
110 or 240 V (nominal)
•
90 to 254 V RMS (autoranging)
Input voltage
•
At 240 V = 1.8 A (one power supply) or 1.9 A (two power
supplies)
•
At 120 V = 3.7 A (one power supply) or 3.9 A (two power
supplies)
Steady-state maximum current
•
0.21 A at 240 V, 60 Hz
•
0.15 A at 120 V, 60 Hz
Standby current
Environmental Specifications
Shipping
Non-operating
Operating
-40°C to 66°C (-
40°F to 150°F)
-40°C to 66°C (-
40°F to 150°F)
10°C to 35°C (50°F
to 95°F)
Temperature
1
5% to 95%
10% to 95%
40% to 60%
Relative humidity (noncondensing)
2
-1000 ft to 40,000
ft
-1000 ft to 10,000
ft
-1000 ft to 10,000
ft
Altitude
5-1000-5 Hz, 2.0
g, sinusoidal, 1
Octave/min., 3-axis
5-1000-5 Hz, 1.0
g, sinusoidal, 1
Octave/min., 3-axis
5-1000-5 Hz, 0.25
g, sinusoidal, 1
Octave/min., 3-axis
Vibration
30 g, every 11ms,
1/2 sine pulse, 3
axis
25 g, every 11ms,
1/2 sine pulse, 3
axis
5 g, every 11ms,
1/2 sine pulse, 3
axis
Shock
1
All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m
(10,000 ft) is applicable. No direct sunlight allowed.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage
corresponds to a pressure minimum of 70 KPa.
HP StorageWorks 6000–series Virtual Library System User Guide
323