HP StorageWorks 6000 Virtual Library System - Manual (Page 214)

Front Panel LEDs and Buttons
Status Description Item
• Green = System is on.
• Amber = System is shut down, but power is
still applied.
• Off = Power cord is not attached, power
supply failure has occurred, no power sup-
plies are installed, facility power is not
available, or the DC-to-DC converter is not
installed. Power On/Standby button and system power
LED
1
• Blue = Identification is activated.
• Flashing blue = System is being managed
remotely.
• Off = Identification is deactivated.
UID button/LED 2
• Green = System health is normal.
• Amber = System is degraded. To identify the
component in a degraded state, refer to sys-
tem board LEDs.
• Red = System is critical. To identify the com-
ponent in a critical state, refer to system
board LEDs.
• Off = System health is normal (when in
standby mode).
Internal health LED 3
• Green = Power supply health is normal.
• Amber = Power redundancy failure occurred.
• Off = Power redundancy failure has oc-
curred. When the node is in standby mode,
power supply health is normal. External health LED (power supply) 4
Component Identification 214